| Model |
CW9179F |
| Software |
● Cisco IOS® XE Software Release 17.18.1 or later |
| Supported wireless LAN controllers |
● Catalyst 9800 Series Wireless Controllers (physical or virtual) |
| ● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode |
| 802.11be |
● 4x4 + 4x4 uplink/downlink MU-MIMO with 4 spatial streams each (5 GHz) |
| ● 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6 GHz) |
| ● 4096 QAM |
| ● Multilink operation |
| ● Preamble puncturing |
| ● Uplink/downlink OFDMA |
| ● TWT |
| ● BSS coloring |
| ● Maximal Ratio Combining (MRC) |
| ● 20-, 40-, 80-, 160- and 320-MHz channels (6 GHz) |
| ● 20-, 40-, 80-, and 160-MHz channels (5 GHz) |
| ● 20-MHz channels (2.4 GHz) |
| ● PHY data rates: in Quad radio mode, up to 24 Gbps (4x4 320 MHz on 6 GHz, 4x4 + 4x4 160 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz); in Tri radio mode, up to 18 Gbps (4x4 320 MHz on 6 GHz, 4x4 160 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz) or PHY data rates up to 23 Gbps (4x4 320 MHz on 6 GHz, 4x4 160 MHz on 5 GHz and 4x4 160 MHz on 5 GHz) |
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) |
| ● 802.11 Dynamic Frequency Selection (DFS) |
| ● Cyclic Shift Diversity (CSD) support |
| ● Wi-Fi Protected Access 3 (WPA3) support |
| 802.11ax |
● 4x4 + 4x4 uplink/downlink MU-MIMO with four spatial streams each (5 GHz) |
| ● 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6 GHz) |
| ● Uplink/downlink OFDMA |
| ● 1024 QAM |
| ● TWT |
| ● BSS coloring |
| ● MRC |
| ● 802.11ax beamforming |
| ● 20, 40, 80, and 160 MHz channels (5 and 6 GHz) |
| ● 20 MHz channels (2.4 GHz) |
| ● PHY data rates up to 10.2 Gbps (4x4 160 MHz on 6 GHz, 4x4 + 4x4 80 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz) |
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| ● 802.11 DFS |
| ● CSD support |
| ● WPA2/WPA3 support |
| 802.11ac |
● 4x4 + 4x4 downlink MU-MIMO with 4x4 spatial streams |
| ● MRC |
| ● 802.11ac beamforming |
| ● 20, 40, 80, and 160 MHz channels |
| ● PHY data rates up to 3.4 Gbps (dual 4x4 160 MHz on 5 GHz) |
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| ● 802.11 DFS |
| ● CSD support |
| ● WPA2/WPA3 support |
| 802.11n version 2.0 (and related) capabilities |
● 4x4 MIMO with four spatial streams |
| ● MRC |
| ● 802.11n and 802.11a/g beamforming |
| ● 20- and 40-MHz channels |
| ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| ● 802.11 DFS |
| ● CSD support |
| Integrated antenna |
● 2.4 directional; 5 directional; 6 directional; IoT omnidirectional; GNSS omnidirectional |
| Interfaces |
● 2x 100M/1000M/2.5G/5G/10G Multigigabit Ethernet (RJ-45) |
| ● Management console port (RJ-45) with default speed of 115200 bps |
| LED Indicators |
● Front and back status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) |
● Access point (without mounting brackets): 18.7Wx 13.0Lx 2.9H in. (475mm x 330mm x 73mm) |
| Weight |
● AP Weight: 10.0 lb (4.54 kg) |
| ● Bracket Weight: 3.8 lbs (1.72 kg) |
| Input power requirements |
● 802.3bt Cisco Universal PoE (Cisco UPOE®), 802.3at Power over Ethernet Plus (PoE+), 802.3af PoE (only for configuring staging, all radios off) |
| ● (Or) Cisco Power Injector – CW-INJ-8 |
| Environmental |
● Nonoperating (storage) temperature: -4° to 158°F (-30° to 70°C) |
| ● Nonoperating (storage) altitude test: 25˚C (77°F) at 17,000 ft (2182 m) |
| ● Operating temperature: -4° to 140°F (-20° to 60°C) not including solar load. |
| ● Operating temperature: -4° to 122°F (-20° to 50°C) including solar load. |
| ● Operating humidity: 10% to 90% (noncondensing) |
| ● Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m) |
| Note: When the ambient operating temperature exceeds 40˚C (104˚F), the access point will shift from 4x4 to 2x2 on the 2.4 GHz, 5 GHz, and 6 GHz radio(s). |
| ● Foreign Body / Water Ingress: IEC60529 IP65 / IP67 (with Outdoor Environment Pack CW-ACC9179-B-00 installed) |
| ● Wind resistance: up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts |
| ● Icing protection: MIL-STD-810F (0.5 in. (13mm)) |
| ● Corrosion: NEMA 250 (600 hrs. salt) |
| ● Solar radiation: EN 60068-2-5 (753 W/m2) |
| System memory |
● 4096 MB DRAM |
| ● 16 GB storage flash |
| Available transmit power settings |
2.4 GHz |
5 GHz |
6 GHz |
| ● 47 dBm (50 mW) |
● 47 dBm (50 mW) |
● 47 dBm (50 mW) |
| ● -10 dB (0.1 mW) |
● -10 dB (0.1 mW) |
● -10 dB (0.1 mW) |
| Certifications |
● Wi-Fi Alliance: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security |
| ● Bluetooth SIG: Bluetooth Low Energy |
Những đặc điểm phần cứng nào giúp Cisco CW9179F đáp ứng nhu cầu mạng doanh nghiệp hiệu năng cao?
Cisco CW9179F được trang bị hai cổng Multigigabit Ethernet 100M/1G/2.5G/5G/10G RJ-45, 4096 MB DRAM, 16 GB Flash, sử dụng nguồn 802.3bt Cisco UPOE, 802.3at PoE+ hoặc bộ cấp nguồn CW-INJ-8. Thiết bị tích hợp ăng-ten định hướng cho băng tần 2.4 GHz, 5 GHz và 6 GHz, hỗ trợ đồng thời nhiều radio với cấu hình 4×4 MU-MIMO, giúp tối ưu vùng phủ sóng, tăng dung lượng kết nối và đáp ứng tốt các ứng dụng yêu cầu băng thông lớn như video 4K/8K, AR/VR, IoT và hệ thống mạng doanh nghiệp mật độ cao.
Cisco Wireless Access Point CW9179F hỗ trợ những chuẩn Wi-Fi nào và mang lại những cải tiến gì so với các thế hệ trước?
Cisco CW9179F hỗ trợ các chuẩn IEEE 802.11be (Wi-Fi 7), 802.11ax (Wi-Fi 6/6E), 802.11ac Wave 2 và 802.11n. Trong đó, Wi-Fi 7 mang đến nhiều cải tiến như 4096-QAM, Multi-Link Operation (MLO), Preamble Puncturing, OFDMA, Target Wake Time (TWT) và hỗ trợ băng thông kênh lên đến 320 MHz trên dải 6 GHz. Thiết bị đạt tốc độ PHY tối đa 24 Gbps ở chế độ Quad Radio, giúp tăng tốc độ truyền dữ liệu, giảm độ trễ và nâng cao hiệu quả hoạt động trong môi trường mật độ thiết bị cao.
Bạn cho mình hỏi CW9179F có thể hoạt động ở những chế độ radio nào thế?
CW9179F hỗ trợ Quad-Radio mode (2x 5 GHz, 1x 2.4 GHz, 1x 6 GHz) với tốc độ lên đến 24 Gbps, hoặc Tri-Radio mode với tốc độ tối đa 18 Gbps, tùy theo cấu hình và nguồn cấp.